Network cables, fiber optics & enterprise equipment
Procurement specifications for government, schools, businesses, IT contractors and private customers. Source cables, passive accessories, switching/routing, optical transceivers and testing equipment. Listings and inventory are added by the store administrator.
From office LANs to campus fiber backbones
Submit an equipment bill of materials, tender reference, drawings and required testing criteria. State whether your project is supply-only or requires installation, termination, certification and commissioning.
Submit RFQ → Institutional purchasing → Request a site assessment →Shop networking categories
1. Copper Ethernet cables & structured cabling
| Product | Specify on purchase order / tender | Notes |
|---|---|---|
| Cat5e | Category rating, solid copper conductor, jacket fire/environment rating, length and shielding | Common for 1 GbE; application/range must be verified |
| Cat6 | U/UTP or shielded type, 23/24 AWG, solid copper, indoor/outdoor, patch vs horizontal cable | 10 GbE reach depends on channel and installation conditions |
| Cat6A | 500 MHz category, shielded/unshielded, connector category, channel testing to selected standard | Common specification for 10GBASE-T channels up to 100 m |
| Patch cords | RJ45 ends, Cat6/Cat6A, snagless/boot, stranded conductors, tested length and color | Use rated assemblies matched to channel design |
| Accessories | Patch panels, jacks, faceplates, wall boxes, racks, cable managers and labeling | Include termination, labeling and acceptance tests |
Quality requirement: specify genuine copper cable, not copper-clad aluminum (CCA), for standards-compliant structured cabling where required. Use the applicable local electrical, fire and installation standards.
2. Fiber optic cables, connectors & passive equipment
| Type / accessory | Specify | Procurement and design check |
|---|---|---|
| OS2 single-mode fiber | Fiber count (2/4/6/12/24/48/96+ cores), G.657/G.652 grade where required, loose tube/tight-buffer, armoring, route length | Typically selected for longer-distance campus, metro or backbone links; verify link loss budget |
| OM3 / OM4 / OM5 multimode | OM grade, fiber count, LC connector, indoor/outdoor and flame rating | Use optics and distance supported for the chosen Ethernet speed |
| Indoor/outdoor fiber | Dielectric/armored, aerial/duct/direct-burial suitability, UV/water protection, pulling tension | Specify installation method and local route conditions |
| Patch cords / pigtails | LC/UPC, SC/UPC or APC as appropriate, simplex/duplex, fiber grade, length and polarity | UPC and APC must not be mismated; match to optic/ODF connectors |
| ODF, closure, splice tray | Rack/Wall mounting, adapter count, splice capacity, protection class and accessories | Include fusion splice, labeling and enclosure protection requirements |
For fiber projects, require as-built fiber core allocation and route records, insertion-loss results, and OTDR traces where the scope calls for them.
3. Active network & optical equipment
| Item | Essential specification fields |
|---|---|
| Managed access / PoE switch | 8/24/48 RJ45 ports, 1/2.5/5/10 GbE, PoE/PoE+/PoE++ per-port and total power budget, uplinks, VLAN, ACL and warranty |
| Aggregation / core switch | 10/25/40/100 GbE port density, switching capacity, redundancy, stacking or MLAG features and optics compatibility |
| Router / firewall | WAN/LAN speeds, VPN throughput, security subscriptions, high availability, interface types and support |
| Wireless AP | Wi-Fi generation, coverage/capacity plan, PoE class, mounting, controller/cloud licensing and security |
| Optical module (SFP family) | Form factor (SFP/SFP+/SFP28/QSFP+/QSFP28), speed, wavelength, reach, single/multimode, connector, duplex/BiDi, OEM interoperability |
| Network rack, UPS & PDU | Rack U height/depth/load, cooling, grounding, power budget, UPS autonomy and outlet types |
| Network tester | Copper cable qualification/certification, optical light source/power meter, OTDR wavelength, launch leads and calibration |
4. Example bill-of-materials checklist for institutional bids
School computer lab: Cat6/Cat6A outlets, RJ45 keystones and faceplates, patch panels and cords, managed access switch, rack and UPS, labels, test certification and as-built port map.
Campus fiber backbone: OS2/OM4 fiber of specified core count, protected routes, termination/ODF, splice trays, LC/SC patch cords, compatible fiber modules, aggregation switches, loss-budget calculation, OTDR and insertion-loss reports.
Government office network: LAN switch count/ports, firewall/router sizing, Wi-Fi access points, cabling and fiber uplinks, power protection, asset labeling, documentation and warranty/maintenance terms.
Include in your RFQ: quantities, manufacturer/model or permitted equivalent, site locations, indoor/outdoor conditions, fiber/core mapping, channel lengths, applicable standards, installation scope, delivery date, support and acceptance criteria.
Equipment availability, suitability for a specific deployment and manufacturer authorization must be verified before issuing a binding tender response.
Request cables, fiber & networking quote → Browse catalog → Network project assessment →